Faa Form 337 PDF Details

Form 337, also known as the "Aircraft Registration and Certificate of Aircraft Nationality Application," is a document used to register an aircraft with the Federal Aviation Administration (FAA). The form must be submitted within 10 days of an aircraft's initial import or arrival in the United States. In addition to registering the aircraft, Form 337 also serves as paperwork for obtaining Certificates of Aircraft Nationality. There are a few specific things that need to be included on this form, so it's important to understand what is required before starting the process. This blog post will go over everything you need to know about Form 337 and how to complete it correctly. Stay tuned!

QuestionAnswer
Form NameFaa Form 337
Form Length3 pages
Fillable?No
Fillable fields0
Avg. time to fill out45 sec
Other nameseditable faa 337 form, faa gov forms 337 fillable, fillable form 337, 337

Form Preview Example

Paperwork Reduction Act Statement: A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a currently valid OMB Control Number. The OMB Control Number for this information collection is 2120-0020.

Public reporting for this collection of information is estimated to be approximately 15 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, completing and reviewing the collection of information.

All responses to this collection of information are mandatory CFR 14 Part 43. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to: Information Collection Clearance Officer, Federal Aviation Administration,

10101 Hillwood Parkway, Fort Worth, TX 76177-1524

US Department of Transportation

Federal Aviation Administration

MAJOR REPAIR AND ALTERATION (Airframe, Powerplant, Propeller, or Appliance)

OMB No. 2120-0020

 

Electronic Tracking Number

Exp: 01/31/2023

 

 

 

 

 

 

For FAA Use Only

 

 

 

 

 

 

INSTRUCTIONS: Print or type all entries. See Title 14 CFR §43.9, Part 43 Appendix B, and AC 43.9-1 (or subsequent revision thereof) for instructions and disposition of this form. This report is required by law (49 U.S.C. §44701). Failure to report can result in a civil penalty for each such violation. (49 U.S.C. §46301(a))

 

Nationality and Registration Mark

Serial No.

 

 

 

 

 

 

1. Aircraft

 

 

 

 

 

 

 

 

 

Make

Model

 

Series

 

 

 

 

 

 

 

 

 

 

Name (As shown on registration certificate)

Address (As shown on registration

certificate)

 

 

 

Address

 

 

 

 

 

 

 

2. Owner

 

City

 

 

 

State

 

 

 

 

 

 

 

 

Zip

 

Country

 

 

 

 

 

 

 

 

 

 

 

 

 

3. For FAA Use Only

 

 

4. Type

 

 

 

 

 

 

 

 

 

5. Unit Identification

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Repair

Alteration

 

Unit

 

 

 

 

Make

 

Model

 

 

 

Serial No.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AIRFRAME

 

 

 

 

 

 

 

 

 

 

(As described in Item 1 above)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

POWERPLANT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROPELLER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Type

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

APPLIANCE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manufacturer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Conformity Statement

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A. Agency's Name and Address

 

 

 

 

 

 

 

B. Kind of Agency

 

 

 

 

 

 

Name

 

 

 

 

 

 

 

 

 

 

 

 

U. S. Certificated Mechanic

 

 

Manufacturer

 

Address

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Foreign Certificated Mechanic

 

C. Certificate No.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

City

 

 

 

 

 

State

 

 

 

 

 

 

Certificated Repair Station

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Zip

 

Country

 

 

 

 

 

 

 

 

 

Certificated Maintenance Organization

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D.I certify that the repair and/or alteration made to the unit(s) identified in item 5 above and described on the reverse or attachments hereto have been made in accordance with the requirements of Part 43 of the U.S. Federal Aviation Regulations and that the information furnished herein is true and correct to the best of my knowledge.

Extended range fuel

 

 

Signature/Date of Authorized Individual

per 14 CFR Part 43

 

 

 

 

 

 

App. B

 

 

 

 

 

 

 

 

 

 

 

 

 

7. Approval for Return to Service

Pursuant to the authority given persons specified below, the unit identified in item 5 was inspected in the manner prescribed by the

Administrator of the Federal Aviation Administration and is

 

 

Approved

 

 

Rejected

 

 

 

 

 

FAA Flt. Standards

 

Manufacturer

 

Maintenance Organization

 

 

 

Persons Approved by Canadian

 

 

Inspector

 

 

 

 

 

Department of Transport

BY

 

 

 

 

 

 

 

 

 

 

 

FAA Designee

 

Repair Station

 

Inspection Authorization

Other (Specify)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Certificate or

 

Signature/Date of Authorized Individual

 

 

 

 

Designation No.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FAA Form 337 (10/06)

PAGE 1

NOTICE

Weight and balance or operating limitation changes shall be entered in the appropriate aircraft record. An alteration must be compatible with all previous alterations to assure continued conformity with the applicable airworthiness requirements.

8. Description of Work Accomplished

(If more space is required, attach additional sheets. Identify with aircraft nationality and registration mark and date work completed.)

Nationality and Registration Mark

Date

Additional Sheets Are Attached

FAA Form 337 (10/06)

PAGE 2

How to Edit Faa Form 337 Online for Free

Handling PDF forms online is simple using our PDF tool. You can fill in 337 form pdf here painlessly. FormsPal team is dedicated to providing you with the perfect experience with our editor by consistently releasing new capabilities and enhancements. With all of these improvements, working with our editor becomes easier than ever before! By taking some easy steps, you'll be able to start your PDF editing:

Step 1: Access the form in our tool by clicking on the "Get Form Button" at the top of this webpage.

Step 2: The tool lets you work with PDF documents in a variety of ways. Modify it by adding personalized text, correct existing content, and put in a signature - all doable within a few minutes!

Filling out this document calls for focus on details. Make certain all necessary blank fields are completed correctly.

1. Begin filling out the 337 form pdf with a group of essential blanks. Note all the important information and be sure there is nothing neglected!

Stage # 1 of completing faa gov forms 337 fillable

2. Once your current task is complete, take the next step – fill out all of these fields - Repair, Alteration, Unit, Make, Model, Serial No, AIRFRAME POWERPLANT, PROPELLER, Type, APPLIANCE, Manufacturer, A Agencys Name and Address Name, Address, State, and Country with their corresponding information. Make sure to double check that everything has been entered correctly before continuing!

Part number 2 in filling out faa gov forms 337 fillable

3. This 3rd segment is typically quite uncomplicated, Pursuant to the authority given, Approved, Rejected, FAA Flt Standards Inspector, Manufacturer, Maintenance Organization, FAA Designee, Repair Station, Inspection Authorization, Persons Approved by Canadian, Other Specify, Certificate or Designation No, SignatureDate of Authorized, FAA Form, and Page - all these empty fields needs to be filled out here.

Inspection Authorization, FAA Flt Standards Inspector, and SignatureDate of Authorized of faa gov forms 337 fillable

4. Your next paragraph needs your attention in the subsequent parts: Description of Work Accomplished, If more space is required attach, Nationality and Registration Mark, and Date. Make certain you give all of the required info to go forward.

Writing segment 4 in faa gov forms 337 fillable

Be very attentive when filling out If more space is required attach and Description of Work Accomplished, since this is where many people make mistakes.

5. Since you get close to the last parts of the file, there are a few extra points to undertake. Mainly, FAA Form, Additional Sheets Are Attached, and Page must all be filled out.

faa gov forms 337 fillable completion process outlined (step 5)

Step 3: When you have looked over the information entered, simply click "Done" to complete your form at FormsPal. Make a 7-day free trial subscription at FormsPal and acquire immediate access to 337 form pdf - download, email, or change in your FormsPal account. Here at FormsPal, we do everything we can to make sure that all your details are maintained secure.

Faa Form 337 isn’t the one you’re looking for?

Related Documents