Mv426B Form – Fill Out and Use This PDF

CEXPLANATION(CheckAllThatApply)

A.❒ I, or my agent, performed the work necessary to reconstruct the vehicle and bring it into compliance with all applicable laws and Pennsylvania vehicle equipment and inspection regulations. The certificate of title/salvage and receipts for parts used are attached.

B.❒ The vehicle was issued a branded title in another state or jurisdiction. The certificate of title is attached.

C.❒ The vehicle is a ❒recovered theft or ❒flood vehicle and was declared a total loss. The certificate of salvage is attached.

D.❒ The vehicle is a ❒recovered theft or ❒flood vehicle; however, the damage did not exceed the replacement value of the vehicle. The certificate of title and an appraisal report including the appraiser's name, license number, signature, vehicle identification number (VIN), actual cash value of the vehicle and level of damage (in dollars) is attached. NOTE: Failure to include an acceptable appraisal report will result in the issuance of a reconstructed brand in addition to the recovered theft/flood brand.

E.❒ The vehicle was already complete at the time of purchase; however, a branded title was not obtained by the previous owner. No further modifications have been made to the vehicle. The certificate of title/salvage, VIN-specific bill of sale and statement from the previous owner attesting to these facts are attached.

F.❒ I, or my agent, assembled the vehicle (or replica) from a kit according to the kit manufacturer's instructions. The manufacturer's certificate of origin, copies of the assembly instructions and all related receipts for additional parts are attached.

G.❒ I, or my agent, assembled the vehicle from various parts. Acopy of the title and/or salvage certificate(s) for all vehicles used for parts and/or all related receipts are attached.

H.❒ I am requesting a ❒street rod, ❒collectible or ❒ modified vehicle. Adetailed description of how the vehicle is configured (chassis, body components, engine, etc.) including all modifications, is attached.

I.❒ Other. Adetailed explanation of how the vehicle is configured, constructed and/or equipped is attached (on a separate

8 ½" X 11" paper).

AUTHORIZEDDEALERSONLY:

J.❒ I am authorized to offer vehicles for sale in Pennsylvania. Parts that were taken from business inventory and used in the reconstruction of the vehicle are identified on the vehicle bill of sale (attached).

1

EWEIGHT CERTIFICATION - To Be Completed by a Certified Enhanced Inspector if All Applicable Weights are NOT Listed on the Title or Salvage Certificate

NOTE: Previously titled vehicles that have been altered to raise the gross vehicle weight rating (GVWR) must be certified by the vehicle manufacturer. A new VIN-specific weight certification decal must be issued for the vehicle by the manufacturer. This label must be affixed to the left (driver's side) door jamb or door latch post. These applications must be forwarded to PennDOT for processing regardless of the application type.

❒Weight Slip Attached - required for all trucks, truck-tractors and trailers if the correct unladen (empty) weight is not listed on the current Certificate of Title, Certificate of Salvage or Manufacturer Certificate of Origin.

NOTE: Vehicle purchases, including vehicle buy-backs from insurers are taxable; motor vehicle repair services (including labor), accessories, parts, supplies and equipment are taxable.

2

H AUTHORIZED SIGNATURES - NOTE: All Applicable Signatures Must Appear Below

APPLICANT - VEHICLE COMPLIANCE CERTIFICATION: I hereby state that this vehicle has been returned to road-worthy condition, by me or my agent, in accordance with all applicable laws and regulations. Further, I hereby verify that the information set forth herein is true and correct to the best of my knowledge, information, and belief. This verification is made subject to the penalties of 18 Pa.C.S. §4904, relating to unsworn falsification to authorities.

SIGNATURE OF APPLICANT ________________________________________________ DATE ______________________

SIGNATURE OF CO-APPLICANT _____________________________________________ DATE ______________________

NAME OF APPLICANTAND CO-APPLICANT (PRINTED) __________________________ DAYTIME PHONE # ______________

ENHANCED VEHICLE SAFETY INSPECTOR: I hereby state that I have examined this vehicle and found it to be in road-worthy condition in accordance with all applicable laws and regulations. Further, I state the information set forth herein is true and correct to the best of my knowledge, information and belief. This verification is made subject to the penalties of 18 Pa. C.S. §4904, relating to unsworn falsification to authorities.

SIGNATURE OF ENHANCED

VEHICLE SAFETY INSPECTOR _________________________________ DATE _______________ STATION # ____________

NAME OF INSPECTOR (PRINTED) ______________________________________ INSPECTOR # _______________________

CERTIFIED DOCUMENT REVIEWER: I hereby state that I have examined the title application and all related supporting documentation and found it to qualify for the title brand(s) indicated by my signature in the appropriate block(s) below. Further, I state the information set forth herein is true and correct to the best of my knowledge, information and belief. This verification is made subject to the penalties of 18 Pa. C. S. §§4904, relating to unsworn falsification to authorities.

Signature must appear in all applicable blocks below.

❒ONLINE PROCESSING REQUIRED: (If Certified Document Reviewer's signature does not appear in this block, forward application to PennDOT for processing)

Signature of Certified Document Reviewer_____________________________________________ DATE____________________

Print Name of Certified

Document Reviewer________________________________________ REVIEWER ID # _____________

MV-426B Completion Instructions

Applications for reconstructed and flood branded titles must be processed through an Online Business Partner. (NOTE:An Online Business Partner may be found on our Web site at www.dmv.state.pa.us and clicking on the Business Partner link.) Additional processing fees may be charged. All other applications must be mailed to:

Commonwealth of Pennsylvania

Department of Transportation

Bureau of Motor Vehicles

Special Services Unit

P.O. Box C69007

Harrisburg, PA 17106-9007

Applicant Information - All applicant information must be entered exactly as it is to appear on the Certificate of Title. A Pennsylvania Certificate of Title will only be issued to a physical address; you may not use a post office box address alone or an out-of-state address. If the Certificate of Title or Salvage was previously issued to co-owners, both owners must sign the MV-426B form or an MV-1 must be completed to change the ownershiponthenewtitle.Allout-of-stateproofofownershipdocumentsmustbeaccompaniedbyacompleted MV-1 application. NOTE: Individuals should list their PA Driver’s License (PA DL) or Photo ID# in the space provided. Businesses should list their Business ID# (Bus. ID), where indicated (i.e. E.I.N.).

3

Vehicle Type - If the vehicle type is a mobile home, "mobile home" should be specified in the "Other" block. Mobile homes do not need to be inspected by an enhanced vehicle safety inspector, and an inspection sticker does notneedtobe affixedtoFormMV-426B. Adetailed descriptionofhowthemobile homewas reconstructed must be attached to your application along with interior and exterior photographs. Your application must be signed by a certified document reviewer and forwarded to PennDOT for processing.

Previously abandoned vehicles and vehicles that were impounded and subsequently sold are considered reconstructed vehicles. Check "Other" in the Vehicle Type block, provide an explanation of how the vehicle was acquired and the level of damage, if any.

Weight Certification - The weight certification for trucks, trailers and truck-tractors is to be completed by a certified enhanced vehicle safety inspector if the correct weight(s) do not appear on the vehicle's Certificate of Title or Salvage (such as unladen weight, gross vehicle weight rating or gross combination weight rating). A weight slip for the unladen (empty) weight must be attached if the correct unladen weight does not appear on the Certificate of Title or Salvage. It is not necessary to complete the weight certification in order to change the registered gross weight of a vehicle. Previously titled vehicles that have been altered to raise or lower the gross vehicle weight rating (GVWR) must be certified by the vehicle manufacturer. A new VIN-specific weight certification decal must be issued for the vehicle by the manufacturer. This label must be affixed to the left (driver's side) door jamb or door latch post.

Components Repaired/Replaced - With the exception of out-of-state vehicles described below, all major components that have been replaced or repaired should be indicated on the application. For all items replaced, you must provide a copy of a receipt or invoice or a copy of the Certificate of Title or Salvage for another vehicle (which you own) from which parts were taken. It is not necessary to attach receipts for repaired components (such as labor for body work). Repair estimates may be used as receipts if they are marked "Paid" and signed and dated by someone authorized by the repair facility to do so. Repair estimates that are not marked "Paid" or those that are not signed and dated are not acceptable for use as receipts.

If the vehicle is coming to Pennsylvania on an out-of-state title that has already been branded (e.g., rebuilt salvage, reconstructed, previously salvaged, etc.), you are not required to document components repaired/replaced, nor provide receipts for parts replaced. Vehicles coming to Pennsylvania on a branded out- of-state title are permitted to obtain a temporary Pennsylvania registration and the vehicle may be operated while the MV-426B application is being processed. If the vehicle is coming to Pennsylvania on an out-of-state salvage certificate, you must present receipts and comply with all requirements under the MV-426B process. Note: These vehicles may not be operated while the MV-426B application is being processed.

If a truck cab is replaced, Form MV-41 (Application for Correction of Vehicle Record or Verification of Vehicle Identification Number) must be attached to the MV-426B application to request a State Replacement VIN Plate. Under Section C (Application for State Replacement VIN Plate), check "Other" and indicate the cab was replaced. The VIN specified on Form MV-41 should be the VIN that appears on the frame of the vehicle (not the VIN displayed on the replacement cab). NOTE: Form MV-41 and the corresponding MV-426B application must be submitted to PennDOT for processing.

When an odometer is repaired or replaced, the mileage indicated must remain the same as before the repair or replacement. If the odometer is incapable of registering the same mileage as before the repair or replacement, the odometer must be adjusted to read zero (0) and a notice in writing must be attached to the left door frame of the vehicle specifying the mileage prior to repair or replacement of the odometer and the date on which it was repaired or replaced.

Feecalculationsshouldbecompletedandsignedbythecertifieddocumentreviewer. Acurrentscheduleoffees can be found at http://www.dmv.state.pa.us under the Payment Information Center. All checks or money orders should be made payable to the Commonwealth of Pennsylvania.

Authorized Signatures - Signatures must be present for the applicant, enhanced vehicle safety inspector (not required for mobile homes) and certified document reviewer. If the vehicle is to be titled in the name of a business, the application must be signed by an owner or corporate officer of the business.

4

Application Attachment Checklist

❒Proof of ownership: Pennsylvania Certificate of Title; Pennsylvania Certificate of Salvage, Certificate of Salvage issued by another state or jurisdiction; Certificate of Title issued by another state or jurisdiction and indicating the vehicle was reconstructed in another state or jurisdiction; Manufacturer's Certificate of Origin or Statement of Origin (MCO/MSO) issued by a recognized manufacturer of vehicles. (Note: AMCO/MSO that indicates the vehicle is not intended for highway use (or similar designation) cannot be titled in

Pennsylvania.) Specially constructed vehicles may have a bill of sale as acceptable proof of ownership (if no other ownership document exists).

❒Unacceptable forms of proof of ownership include Form 907A issued by the state of New York, any title, certificate of origin, statement of origin or certificate of salvage that indicates the vehicle is to be used for parts only; is not suitable to be rebuilt or titled; or is not designed, constructed or intended for use on public roadway. This includes statements of origin for all terrain vehicles (ATVs).

❒Form MV-1 (Application for Certificate of Title) if the applicant's name does not currently appear on the face of the certificate of title or salvage or if a prior co-owner is to be dropped on the new title.

❒Appraisal Report (for flood or recovered theft vehicles where the damage does not exceed the replacement value of the vehicle). An acceptable appraisal report must contain the name and signature of the licensed appraiser; the appraiser's license number; the VIN of the vehicle appraised; the level of damage (in dollars); and the actual cash value of the vehicle (prior to flood or theft)

❒Abill of sale if the applicant's name is not displayed on the face of the certificate of title/salvage (not required for dealers who are sales tax exempt). If a salvaged vehicle was reassigned free of charge, Form MV-13ST (Affidavit of Gift) may be submitted in lieu of a bill of sale. An acceptable bill of sale includes the seller's name; seller's signature; buyer's name; vehicle identification number (VIN); date of sale; purchase price; and if applicable, a statement from the seller indicating the vehicle was already completed at the time of purchase and no branded title was obtained by the seller. If this information does not appear on the bill of sale, a separate statement must be signed by the seller, notarized and contain the VIN number of the vehicle

❒Apower of attorney for any person signing on behalf of a purchaser or seller, if applicable. Note:An "agent" signing on behalf of an employer is not required to attach a power of attorney.

❒Retention (buy-back) letter from insurance company if vehicle was totaled and retained by the applicant for the purpose of retitling it. This letter (on the insurance company or insurance agent's letterhead) should indicate the amount deducted from the insurance pay-off (settlement) to allow the insured to retain the vehicle.

❒Copies of all receipts for all components replaced as indicated on the MV-426B application (if required). If you indicate a component was taken from another vehicle, a copy of the salvage certificate or title (in your name) for the parts vehicle must be attached in lieu of a receipt. Note: Only business entities (dealers, rebuilders, etc.) titling the vehicle in the business name may claim parts used in the reconstruction were taken from existing inventory, and therefore, no receipts are needed. If a dealer or rebuilder reconstructed a vehicle for the applicant, the parts used to complete the vehicle may be listed on the bill of sale.

❒A weight slip if the correct unladen weight of a truck, trailer or truck-tractor is not listed on the Certificate of Title or Salvage.

❒Adetailed description (on separate 8 ½" X 11" paper) for specially constructed, collectible, modified vehicles and street rods indicating how the vehicle was configured and assembled.

❒Photographs of the vehicle showing the front, rear, left and right sides. Photographs must be signed/dated by the enhanced vehicle safety inspector. Additional photographs may be required for mobile homes, motor homes and collectible vehicles. Mobile home photographs do not have to be signed by an enhanced vehicle safety inspector.

5

❒All applicable fees. Checks and/or money orders should be made payable to Commonwealth of Pennsylvania.

❒Any unpaid sales tax for vehicle purchase, insurance buy-back (retention) or any items purchased without tax collected (such as online purchases).

If the vehicle was purchased outside Pennsylvania within the previous six (6) months, the applicant must show proof of sales tax paid in the form of a sales tax receipt, notarized bill of sale or notarized letter from the seller indicating the amount of sales tax paid. Refer to Form REV-227 (Pennsylvania Sales and Use Tax Credit Chart) to determine if you may claim a tax credit for sales tax paid in another state. This chart can be found online at http://www.revenue.state.pa.us/revenue/lib/revenue/rev-227.pdf. NOTE: Applicants exempt from Pennsylvania sales tax will list the appropriate Sales Tax Exemption reason code in Sections 1A and/or 1B. (See exemption codes listed on the reverse side of MV-1 form.)

Sales tax is not required to be paid to PennDOT in connection with the sale of a used mobile home, regardless of whether it is permanently affixed or relocated.

❒Form MV-41 (Application for Correction of Vehicle Record or Verification of Vehicle Identification Number) if a Pennsylvania replacement vehicle identification number (VIN) plate is required. NOTE: Form MV-41 and the corresponding MV-426B application must be submitted to PennDOT for processing.

6