When undertaking a construction project in Klamath County, one crucial step is ensuring the structure can withstand the local snow load, which refers to the weight of snow that a building must be designed to handle. This is where the Klamath Snow Load form comes into play, serving as a key document for homeowners and designers alike. Located at 305 Main Street, Klamath Falls, Oregon, the Building Division requires this form to determine the appropriate snow load for a specific project based on its location and elevation. By providing essential details such as the owner's name, contact information, a brief description of the project, and more specific data like the address, township/range/section, or latitude/longitude, applicants can ensure the safety and compliance of their structures with the local building code. The form also requires an attachment of the project location marked on a map, along with any supplementary information that might affect the snow load calculation. With the signature of the owner or designer, the form is completed and ready for official use by the county, which will reference the Snow Load Analysis of Oregon to determine the ground snow load. This process underscores the importance of accurate information from the applicant, mitigating the risk of incorrect load determination that could compromise the integrity of the construction. Furthermore, the Klamath County Building Division recommends consulting with a local design professional to address potential anomalies in snow load maps before proceeding with design and construction, ensuring each project is optimally prepared to withstand local weather conditions.
Question | Answer |
---|---|
Form Name | Klamath Snow Load Form |
Form Length | 1 pages |
Fillable? | No |
Fillable fields | 0 |
Avg. time to fill out | 15 sec |
Other names | oregon klamath county snow load charts, klamath load, klamath county snow loads, klamath county snow load requirements |
KLAMATH COUNTY
BUILDING DIVISION
Snow Load Design Criteria Request
305 Main Street
Klamath Falls, OR 97601
Ph: (541)
*OWNER NAME*PHONE
________________________________________________________________________________
*MAIL ADDRESS or EMAIL
Provide a brief description of your project: _____________________________________________
LOCATION Provide one or more of the following for your project location:
1.Address ________________________________________________________________
2.Township / Range / Section ________________________________________________
3.Latitude/Longitude _______________________________________________________
4.Mark location on map and attach to questionnaire.
ELEVATION at project location: _____________________________________________________
Additional information (site conditions, directions, etc.): __________________________________
The above information is correct to the best of my knowledge:
Signature of Owner / Designer: _________________________________ Date: _______________
OFFICE USE ONLY below this line
SEAO adopted snow load maps:3rd Edition Dec 2007
Elevation *: _________________ Ground Snow Load*: _____________ lbs. per sq. ft.
Approved By: ____________________________________ |
Date:_____________ |
Owner notified by: _________________________________ |
Date:_____________ |
*Required fields |
|
Ground Snow Load is based on project location and elevation provided by applicant above and as derived from the Oregon Residential Specialty Code and the Snow Load Analysis of Oregon, published by the Structural Engineers of Oregon, revised 12/2007. Erroneous information by applicant may result in incorrect determination of Ground Snow Load.
It has been recommended by BCD that Klamath County utilize the SEAO Snow Load mapping that the State has adopted.
We recognize some areas with anomalies in the snow load maps, and prior to development, recommend you seek advice from a local Design Professional regarding your specific development site prior to design and/or construction.
Thank you for your cooperation in this matter.
Greg Seger
Building Official
Klamath County