How to Fill Out DA Form 2410

DA Form 2410 at a glance

What it is: DA Form 2410 (MAR 2014) is the COMPONENT REMOVAL/REPAIR/INSTALL/GAIN/LOSS RECORD.

A filled-in DA Form 2410 example: a mechanic records an installed pump

DA Form 2410 example filled out, example: a mechanic records an installed pump
A mechanic fills out DA Form 2410 to record an installed pump. Only identification is recorded, so Next higher assembly and Gain/loss/repair/admin information stay empty. The picture shows the filled form and all its values are invented.

How to fill out DA Form 2410, box by box

SECTION I - MAINTENANCE ACTION

DA Form 2410 example filled out, sECTION I - MAINTENANCE ACTION

Under SECTION I - MAINTENANCE ACTION, check INSTALL, REMOVE, REPAIR or GAIN/LOSS.

SECTION II - IDENTIFICATION

DA Form 2410 example filled out, sECTION II - IDENTIFICATION

In SECTION II - IDENTIFICATION, enter 1. NOMENCLATURE, 2. NSN, 3. PART NUMBER and 4. SERIAL NUMBER.

In SECTION II - IDENTIFICATION, enter 5. MII, 6. CAGE CODE, 7. LANDINGS, 8. NO. OF PREV O/Hs, 9. TIME SINCE LAST INST, 10. TIME SINCE NEW, 11. TIME SINCE O/H and 12. FAILURE CODE.

In SECTION II - IDENTIFICATION, enter 13. METER HRS, 14. HSF, 15. WUC and 16. CONFIG CODE.

In SECTION II - IDENTIFICATION, enter 17. COMPONENT CUMULATIVE COUNT/HOURS as a. LCF 1, b. LCF 2, c. TTI and d. OP HOURS.

In SECTION II - IDENTIFICATION, enter 18. POS, 19. STARTS SINCE NEW, 20. STARTS SINCE O/H and 21. VERSION.

Next higher assembly (NHA)

DA Form 2410 example filled out, next higher assembly (NHA)

In SECTION III - NEXT HIGHER ASSEMBLY (NHA) INSTALL/REMOVE INFORMATION, enter 22. NHA NOMENCLATURE, 23. NHA NSN, 24. NHA PART NUMBER, 25. NHA SERIAL NUMBER, 26. NHA HOURS, 27. START METER, 28. METER HRS, 29. HISTORY RECORDER S/N, 30. MALFUNCTION CODE, 31. WHEN DISCOVERED and 32. HISTORY RECORDER READING, and 33. NHA CUMULATIVE COUNT/HOURS as a. LCF 1, b. LCF 2, c. TTI and d. OP HOURS.

Gain/loss/repair/admin information

DA Form 2410 example filled out, gain/loss/repair/admin information

In SECTION IV - GAIN/LOSS/REPAIR/ADMIN INFORMATION, under 34. INSPECTION ACTION CODES, check SERVICEABLE, UNSERVICEABLE, REPAIR, OVERHAUL, RECAP or MWO.

In SECTION IV - GAIN/LOSS/REPAIR/ADMIN INFORMATION, enter 35. GAIN OR LOSS CODE, 36. NEW PART NUMBER and 37. NEW NSN.

In SECTION IV - GAIN/LOSS/REPAIR/ADMIN INFORMATION, enter 38. ACTUAL FAILURE CODE, 41. SRA, 39. MAINTENANCE LEVEL, 42. UIC and 40. MANHOURS.

In SECTION IV - GAIN/LOSS/REPAIR/ADMIN INFORMATION, enter 43. CONTRACT NUMBER, 44. DATE, 45. PID AND TELEPHONE NUMBER, 46. AKO USER NAME, 47. LOST/SHIPPED TO, 48. LOCATION and REMARKS.

More rules for DA Form 2410

For use of this form, see DA PAM 738-751; the proponent agency is DCS, G-4.

Sources

[1] DA Form 2410 (MAR 2014), Component Removal/Repair/Install/Gain/Loss Record, U.S. Department of the Army (the Official source link on this page).

DA Form 2410 PDF Details

Section I is the maintenance action: install, remove, repair or gain/loss.

Section II: identification: nomenclature, NSN, part number, serial number, MII, cage code and landings.

Section III: next higher assembly (NHA) install/remove information: NHA nomenclature, NSN, part number, serial number and hours.

Section IV: gain/loss/repair/admin information, with inspection action codes: serviceable, unserviceable, repair, overhaul, recap and MWO.

QuestionAnswer
Form NameDA Form 2410
Form Length1 page
Fillable?Yes
Fillable fields67
Avg. time to fill out12 min
EditionMAR 2014
Proponent agencyDCS, G-4 (DA PAM 738-751)
Other namesDA Form 2410, DA 2410, 2410, Component Removal/Repair/Install/Gain/Loss Record
Official sourceDA Form 2410 (Rev MAR 2014), U.S. Army