How to Fill Out Form 7460-1

Form 7460-1 at a glance

What it is: Under §77.7, FAA Form 7460-1, Notice of Proposed Construction or Alteration, is the form you must submit to the FAA if you are required to file notice under §77.9.

Where and when to file: You must submit this form at least 45 days before the start date of the proposed construction or alteration or the date an application for a construction permit is filed, whichever is earliest. Mail Processing Center, Federal Aviation Administration, Southwest Regional Office, Obstruction Evaluation Group, 10101 Hillwood Parkway, Fort Worth, TX 76177, Fax: (817) 222-5920, Website: https://oeaaa.faa.gov

A filled-in Form 7460-1 example: a temporary crane

Form 7460-1 example filled out, example: a temporary crane
Jane Q. Sample, a contractor, files Form 7460-1 for a temporary crane. The crane rises 150 ft. above ground at a site 12 miles from an airport, for 3 months. The picture shows page 3 only, and all its values are invented. The crane is new construction, so Alteration and Existing stay empty. It is temporary, so Permanent stays empty. Crane is the only type, so the other Type boxes stay empty. Red Lights and Paint is the only lighting preferred, so the five other lighting boxes stay empty. NAD 83 is the datum, so NAD 27 and Other stay empty. The site is 500 ft. AMSL, so the overall height is 650 ft. She signs on 03/16/2026, more than 45 days before work begins on 06/01/2026. The sponsor files for herself, so the Sponsor's Representative lines stay empty. The crane has no FCC registration, so 8. FCC Antenna Structure Registration Number stays empty. It has no earlier study, so 19. Previous FAA Aeronautical Study Number stays empty. It has no transmitter, so the Frequency/Power rows stay empty. Nothing goes in Aeronautical Study Number because it is for FAA use only.

How to fill out Form 7460-1, box by box

1. Sponsor and 2. Sponsor's Representative (if other than #1)

Form 7460-1 example filled out, 1. Sponsor and 2. Sponsor's Representative (if other than #1)

In Items 1 and 2, include the name, address and phone number of a personal contact point as well as the company name.

3. Notice of

Form 7460-1 example filled out, 3. Notice of

New Construction would be a structure that has not yet been built.

Alteration is a change to an existing structure such as the addition of a side mounted antenna, a change to the marking and lighting, a change to power and/or frequency, or a change to the height. The nature of the alteration shall be included in Item 21, Complete Description of Proposal.

Existing would be a correction to the latitude and/or longitude, a correction to the height, or if filing on an existing structure which has never been studied by the FAA. The reason for the notice shall be included in Item 21, Complete Description of Proposal.

4. Duration

Form 7460-1 example filled out, 4. Duration

If Permanent, so indicate. If Temporary, such as a crane or drilling derrick, enter the estimated length of time the temporary structure will be up.

5. Work Schedule

Form 7460-1 example filled out, 5. Work Schedule

Enter the date that construction is expected to start and the date that construction should be completed.

6. Type

Form 7460-1 example filled out, 6. Type

Please indicate the type of structure. Do not leave blank.

7. Marking/Painting and/or Lighting Preferred

Form 7460-1 example filled out, 7. Marking/Painting and/or Lighting Preferred

In the event that obstruction marking and lighting is required, indicate the type desired. If no preference, check “other” and indicate “no preference”. Do not leave blank.

High Intensity lighting shall be used only for structures over 500' AGL. In the absence of high intensity lighting for structures over 500' AGL, marking is also required.

8. FCC Antenna Structure Registration Number (if applicable)

Form 7460-1 example filled out, 8. FCC Antenna Structure Registration Number (if applicable)

If this is an existing tower that has been registered with the FCC, enter the FCC Antenna Structure Registration Number (if applicable) here.

9. Latitude, 10. Longitude and 11. Datum

Form 7460-1 example filled out, 9. Latitude, 10. Longitude and 11. Datum

Latitude and longitude must be geographic coordinates, accurate to within the nearest second or to the nearest hundredth of a second if known. Latitude and longitude derived solely from a hand-held GPS instrument is NOT acceptable.

This data, when plotted, should match the site depiction submitted under Item 20.

NAD 83 is preferred; however, latitude and longitude may be submitted in NAD 27. Also, in some geographic areas where NAD 27 and NAD 83 are not available other datum may be used.

It is important to know which datum is used. Do not leave blank.

12. Nearest: City: State

Form 7460-1 example filled out, 12. Nearest: City: State

Enter the name of the nearest city and state to the site. If the structure is or will be in a city, enter the name of that city and state.

13. Nearest Public-use (not private-use) or Military Airport or Heliport, 14. Distance and 15. Direction

Form 7460-1 example filled out, 13. Nearest Public-use (not private-use) or Military Airport or Heliport, 14. Distance and 15. Direction

Enter the full name of the nearest public-use (not private-use) airport or heliport or military airport or heliport to the site.

Enter the distance from the airport or heliport listed in #13 to the structure.

Enter the direction from the airport or heliport listed in #13 to the structure.

16. Site Elevation (AMSL), 17. Total Structure Height (AGL) and 18. Overall Height

Form 7460-1 example filled out, 16. Site Elevation (AMSL), 17. Total Structure Height (AGL) and 18. Overall Height

Item 16: Enter the site elevation above mean sea level and expressed in whole feet rounded to the nearest foot (e.g. 17'3” rounds to 17', 17'6” rounds to 18'). This data should match the ground contour elevations for site depiction submitted under Item 20.

Item 17: Enter the total structure height above ground level in whole feet rounded to the next highest foot (e.g. 17'3” rounds to 18'). The total structure height shall include anything mounted on top of the structure, such as antennas, obstruction lights, lightning rods, etc. Item 18: Enter the overall height above mean sea level and expressed in whole feet. This will be the total of Item 16 + Item 17.

19. Previous FAA Aeronautical Study Number (if applicable)

Form 7460-1 example filled out, 19. Previous FAA Aeronautical Study Number (if applicable)

If an FAA aeronautical study was previously conducted, enter the previous study number.

20. Description of Location

Form 7460-1 example filled out, 20. Description of Location

Description of Location: Enter the relationship of the structure to roads, airports, prominent terrain, existing structures, etc. Attach an 8-1/2” x 11” non-reduced copy of the appropriate 7.5 minute U.S. Geological Survey (USGS) Quadrangle Map MARKED WITH A PRECISE INDICATION OF THE SITE LOCATION. If available, attach a copy of a documented site survey with the surveyor's certification stating the amount of vertical and horizontal accuracy in feet.

21. Complete Description of Proposal

Form 7460-1 example filled out, 21. Complete Description of Proposal

Complete Description of Proposal, ITEM #21. For transmitting stations, include maximum effective radiated power (ERP) and all frequencies. For antennas, include the type of antenna and center of radiation (Attach the antenna pattern, if available). For microwave, include azimuth relative to true north. For overhead wires or transmission lines, include size and configuration of wires and their supporting structures (Attach depiction). For each pole/support in Item 21, include coordinates, site elevation, and structure height above ground level or water. For buildings, include site orientation, coordinates of each corner, dimensions, and construction materials.

For alterations, explain the alteration thoroughly. For existing structures, thoroughly explain the reason for notifying the FAA (e.g. corrections, no record or previous study, etc.).

Date, Typed or Printed Name and Title of Person Filing Notice, Signature

Form 7460-1 example filled out, date, Typed or Printed Name and Title of Person Filing Notice, Signature

Enter the Date, the Typed or Printed Name and Title of Person Filing Notice, and the Signature. I agree to mark and/or light the structure in accordance with established marking & lighting standards as necessary.

More rules for Form 7460-1

If you propose construction or alteration that is also subject to the licensing requirements of the Federal Communications Commission (FCC), you must submit notice to the FAA on or before the date that the application is filed with the FCC.

The 45-day advance notice requirement is waived if immediate construction or alteration is required because of an emergency involving essential public services, public health, or public safety. You may provide notice to the FAA by any available, expeditious means. You must file a completed FAA Form 7460-1 within 5 days of the initial notice to the FAA.

Common questions about Form 7460-1

What is a 7460 permit?

Under §77.7, FAA Form 7460-1, Notice of Proposed Construction or Alteration, is the form you must submit to the FAA if you are required to file notice under §77.9. This information is collected to evaluate the effect of proposed construction or alteration on air navigation and is not confidential.

Is there a penalty?

Persons who knowingly and willingly violate the notice requirements of part 77 are subject to a civil penalty of $1,000 per day until the notice is received, pursuant to 49 U.S.C., Section 46301(a) (checked October 22, 2026).

When is this form not the right one?

You do not need to file notice for construction or alteration of: (1) Any object that will be shielded by existing structures of a permanent and substantial nature or by natural terrain or topographic features of equal or greater height, and will be located in the congested area of a city, town, or settlement where the shielded structure will not adversely affect safety in air navigation. (2) Any air navigation facility, airport visual approach or landing aid, aircraft arresting device, or meteorological device meeting FAA-approved siting criteria or an appropriate military service siting criteria on military airports, the location and height of which are fixed by its functional purpose. (3) Any construction or alteration for which notice is required by any other FAA regulation. (4) Any antenna structure of 20 feet or less in height, except one that would increase the height of another antenna structure.

Sources

[1] Form 7460-1 (03/25), Notice of Proposed Construction or Alteration, Federal Aviation Administration (the Official source link on this page).

FAA Form 7460-1 PDF Details

You must submit this form at least 45 days before the start date of the proposed construction or alteration or the date an application for a construction permit is filed, whichever is earliest.

Processing: failure to provide all requested information may delay processing of your notice.

Datum: NAD 83 is preferred; however, latitude and longitude may be submitted in NAD 27.

Hand-held GPS: latitude and longitude derived solely from a hand-held GPS instrument is NOT acceptable.

Other rules: filing this information with the FAA does not relieve the sponsor from complying with any other federal, state or local rules or regulations.

QuestionAnswer
Form NameFAA Form 7460-1
Form Length3 pages
Fillable?Yes
Fillable fields95
Avg. time to fill out16 min
Edition03/25
Issuing agencyFederal Aviation Administration
Matches the agency's fileYes, checked October 2, 2026
Other names7460-1, 74601, FAA 7460-1, FAA Form 7460-1, FAA 7460, Notice of Proposed Construction or Alteration
Official sourceFAA Form 7460-1 (Rev 03/25), Federal Aviation Administration