AMC IMT 1033 Form – Fill Out and Use This PDF

AMC IMT 1033 Form PDF Details

The AMC IMT 1033 is the official Shipper's Declaration for Dangerous Goods used by Air Mobility Command (AMC). This form is mandatory for any person or organization transporting hazardous materials via AMC-operated or AMC-controlled aircraft. The form aligns with International Air Transport Association (IATA) Dangerous Goods Regulations and meets U.S. Department of Transportation (DOT) requirements for air transport documentation.

Who Needs to Complete the AMC IMT 1033

The form must be completed by the shipper of record for any dangerous goods shipment transported by air under AMC authority. This includes defense contractors, government agencies, military units, and authorized freight forwarders. The shipper is responsible for ensuring the accuracy of all information provided. Incomplete or inaccurate declarations may result in shipment refusal, cargo delays, or legal action.

What the Form Covers

The AMC IMT 1033 is a two-page document with several key sections. The shipper identification section captures the sender's full name, address, and contact details. The goods description section requires the UN number, proper shipping name, hazard class or division, packing group, and the total quantity by net mass or volume for each item. Emergency contact information must also be provided. The final section contains the shipper's certification and signature confirming that all goods are properly classified, packaged, marked, and labeled in accordance with applicable regulations.

Dangerous Goods Classifications Covered

The form accommodates shipments across all IATA hazard classes. These include Class 1 explosives, Class 2 gases (including flammable and toxic gases), Class 3 flammable liquids, Class 4 flammable solids and self-reactive substances, Class 5 oxidizers and organic peroxides, Class 6 toxic and infectious substances, Class 7 radioactive materials, Class 8 corrosive substances, and Class 9 miscellaneous dangerous goods. The shipper must select the correct classification and include all required supporting information for each hazard class declared.

Compliance and Regulatory Notes

Completion of the AMC IMT 1033 does not replace any additional documentation required by IATA, ICAO Technical Instructions, or other regulatory bodies. Packing specifications must match the declared packing group. All packages must be marked and labeled according to the current IATA DGR edition in effect at the time of shipment. The emergency telephone number listed on the form must be monitored 24 hours a day throughout the transport. Shippers are advised to retain a copy of the completed declaration for a minimum of three months following the shipment date.

Common Errors to Avoid

A frequent mistake is entering an incorrect UN number or omitting the packing group designation. Many shippers also fail to list the net quantity in the correct unit of measurement as specified by the IATA DGR. Leaving the emergency contact field blank or providing a number that is not available around the clock is another common compliance failure. Shippers sometimes use an outdated edition of the IATA DGR, which may reference superseded requirements. Double-checking all entries against the current DGR edition before signing the declaration is strongly recommended.

For related documentation, you may also need the Shipper's Declaration Form or the Dangerous Goods Check Sheet when preparing your shipment. If you are coordinating multiple cargo items, the Air Cargo Manifest or the Hazardous Bill of Lading may also be required. For non-hazardous shipments, the Non-Hazardous Manifest is the appropriate alternative. Other AMC-related forms include the AMC Form and the AMC Form 1003.